Cisco IOS: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Packet Capture (Catalyst 6506-E) # show monitor # Show run | inc monitor session (config)# no monitor session 1 (config)# monitor session 1 source vlan 1309 (config)# monitor session 1 destination interface Gi2/1/3 ACLs Insert into existing Standard ACL # show access-list 24 (config)# ip access-list standard 24 (config-std-nacl)# 15 permit 10.1.2.0 0.0.0.255 (config-std-nacl)# exit (config)# ip access-list resequence 24 10 10 Insert into existing Extended ACL # sh a...") |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
Packet Capture (Catalyst 6506-E) | =Packet Capture= | ||
(This example is on a Catalyst 6506-E) | |||
# Show run | inc monitor session | # <code># show monitor</code> | ||
# <code># Show run | inc monitor session</code> | |||
# <code>(config)# no monitor session 1</code> | |||
# <code>(config)# monitor session 1 source vlan 1309</code> | |||
# <code>(config)# monitor session 1 destination interface Gi2/1/3</code> | |||
=ACLs= | |||
===Insert into existing Standard ACL=== | |||
(config)# | # <code># show access-list 24</code> | ||
# <code>(config)# ip access-list standard 24</code> | |||
# <code>(config-std-nacl)# 15 permit 10.1.2.0 0.0.0.255</code> | |||
# <code>(config-std-nacl)# exit</code> | |||
# <code>(config)# ip access-list resequence 24 10 10</code> | |||
===Insert into existing Extended ACL=== | |||
Insert into existing | # <code># sh access-lists vlan2-out</code> | ||
# | # <code>(config)# ip access-list extended vlan2-out</code> | ||
# <code>(config-ext-nacl)# 1421 permit tcp object-group VPN.CLIENTS host 10.1.49.23 eq 3389</code> | |||
# <code>(config)# ip access-list resequence vlan2-out 10 10</code> | |||
=VPN= | |||
# sh access-lists vlan2-out | ==Some Useful Links== | ||
(config)# ip access-list extended vlan2-out | |||
(config-ext-nacl)# 1421 permit tcp object-group VPN.CLIENTS host 10.1.49.23 eq 3389 | |||
(config)# ip access-list resequence vlan2-out 10 10 | |||
VPN | |||
Some Useful Links | |||
[https://www.cisco.com/c/en/us/support/docs/routers/1700-series-modular-access-routers/71462-rtr-l2l-ipsec-split.html LAN-to-LAN IPsec Tunnel Between Two Routers Configuration Example] | [https://www.cisco.com/c/en/us/support/docs/routers/1700-series-modular-access-routers/71462-rtr-l2l-ipsec-split.html LAN-to-LAN IPsec Tunnel Between Two Routers Configuration Example] | ||
Latest revision as of 02:56, 12 February 2024
Packet Capture
(This example is on a Catalyst 6506-E)
# show monitor# Show run | inc monitor session(config)# no monitor session 1(config)# monitor session 1 source vlan 1309(config)# monitor session 1 destination interface Gi2/1/3
ACLs
Insert into existing Standard ACL
# show access-list 24(config)# ip access-list standard 24(config-std-nacl)# 15 permit 10.1.2.0 0.0.0.255(config-std-nacl)# exit(config)# ip access-list resequence 24 10 10
Insert into existing Extended ACL
# sh access-lists vlan2-out(config)# ip access-list extended vlan2-out(config-ext-nacl)# 1421 permit tcp object-group VPN.CLIENTS host 10.1.49.23 eq 3389(config)# ip access-list resequence vlan2-out 10 10
VPN
Some Useful Links
LAN-to-LAN IPsec Tunnel Between Two Routers Configuration Example
Cisco IOS VPN Configuration Guide
Site-to-Site IKEv2 Tunnel between ASA and Router Configuration Examples