Ruckus: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=General= ===Determine port of MAC=== sh mac-address | inc 5916 Output: 3817.c3ca.5916 11 Dynamic 277 ===Show detailed LLDP=== sh lldp neigh detail ports e 11 Output: Local port: 11 Neighbor: 78a6.e109.ddd1, TTL 114 seconds + Chassis ID (MAC address): 78a6.e109.dda0 + Port ID (MAC address): 78a6.e109.ddd1 + Time to live: 120 seconds + System name : "s1-137-switch" + Port description : "10GigabitEthernet1/2/1" + System capabili...") |
No edit summary |
||
| Line 3: | Line 3: | ||
===Determine port of MAC=== | ===Determine port of MAC=== | ||
sh mac-address | inc 5916 | <code>sh mac-address | inc 5916</code> | ||
Output: | Output: | ||
3817.c3ca.5916 11 Dynamic 277 | <code>3817.c3ca.5916 11 Dynamic 277</code> | ||
===Show detailed LLDP=== | ===Show detailed LLDP=== | ||
sh lldp neigh detail ports e 11 | <code>sh lldp neigh detail ports e 11</code> | ||
Output: | Output: | ||
Local port: 11 | Local port: 11 | ||
Neighbor: 78a6.e109.ddd1, TTL 114 seconds | |||
+ Chassis ID (MAC address): 78a6.e109.dda0 | |||
+ Port ID (MAC address): 78a6.e109.ddd1 | |||
+ Time to live: 120 seconds | |||
+ System name : "s1-137-switch" | |||
+ Port description : "10GigabitEthernet1/2/1" | |||
+ System capabilities : bridge | |||
Enabled capabilities: bridge | |||
+ 802.3 MAC/PHY : auto-negotiation supported, but disabled | |||
Operational MAU type : 1000BaseSX-FD | |||
+ Link aggregation: not capable | |||
+ Maximum frame size: 10200 octets | |||
+ Port VLAN ID: none | |||
+ Management address (IPv4): 10.0.0.29 | |||
===Span/Mirror Port=== | ===Span/Mirror Port=== | ||
Revision as of 02:35, 12 February 2024
General
Determine port of MAC
sh mac-address | inc 5916
Output:
3817.c3ca.5916 11 Dynamic 277
Show detailed LLDP
sh lldp neigh detail ports e 11
Output:
Local port: 11
Neighbor: 78a6.e109.ddd1, TTL 114 seconds
+ Chassis ID (MAC address): 78a6.e109.dda0
+ Port ID (MAC address): 78a6.e109.ddd1
+ Time to live: 120 seconds
+ System name : "s1-137-switch"
+ Port description : "10GigabitEthernet1/2/1"
+ System capabilities : bridge
Enabled capabilities: bridge
+ 802.3 MAC/PHY : auto-negotiation supported, but disabled
Operational MAU type : 1000BaseSX-FD
+ Link aggregation: not capable
+ Maximum frame size: 10200 octets
+ Port VLAN ID: none
+ Management address (IPv4): 10.0.0.29
Span/Mirror Port
- MIRROR PORT
- the port that Wireshark is connected to (1/1/5 below)
- MONITOR PORT
- the port you want to capture traffic from (1/1/3 below)
(config)# mirror-port ethernet 1/1/5
(config)# interface e 1/1/3
(config-if-e1000-1/1/3)# monitor ethernet 1/1/5 both
Security
2020-06-07 - Some good info to hold you over: http://www.netadmin.us/docs/TACACS-RADIUS.pdf