Ruckus: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 33: | Line 33: | ||
===Span/Mirror Port=== | ===Span/Mirror Port=== | ||
; MIRROR | ; MIRROR Port: the port that Wireshark is connected to (e.g., 1/1/5 below) | ||
; MONITOR | ; MONITOR Port: the port you want to capture traffic from (e.g., 1/1/3 below) | ||
<code>(config)# mirror-port ethernet 1/1/5</code> | <code>(config)# mirror-port ethernet 1/1/5</code> | ||
Revision as of 02:36, 12 February 2024
General
Determine port of MAC
sh mac-address | inc 5916
Output:
3817.c3ca.5916 11 Dynamic 277
Show detailed LLDP
sh lldp neigh detail ports e 11
Output:
Local port: 11
Neighbor: 78a6.e109.ddd1, TTL 114 seconds
+ Chassis ID (MAC address): 78a6.e109.dda0
+ Port ID (MAC address): 78a6.e109.ddd1
+ Time to live: 120 seconds
+ System name : "s1-137-switch"
+ Port description : "10GigabitEthernet1/2/1"
+ System capabilities : bridge
Enabled capabilities: bridge
+ 802.3 MAC/PHY : auto-negotiation supported, but disabled
Operational MAU type : 1000BaseSX-FD
+ Link aggregation: not capable
+ Maximum frame size: 10200 octets
+ Port VLAN ID: none
+ Management address (IPv4): 10.0.0.29
Span/Mirror Port
- MIRROR Port
- the port that Wireshark is connected to (e.g., 1/1/5 below)
- MONITOR Port
- the port you want to capture traffic from (e.g., 1/1/3 below)
(config)# mirror-port ethernet 1/1/5
(config)# interface e 1/1/3
(config-if-e1000-1/1/3)# monitor ethernet 1/1/5 both
Security
2020-06-07 - Some good info to hold you over: http://www.netadmin.us/docs/TACACS-RADIUS.pdf